K1610-F2 Double Head Laser Cutter With Honeycomb
The two heads of the KASU K1610-F2 double-head laser cutting machine with a honeycomb table can simultaneously cut the same shapes of patterns at super high speed. And it can cut and engrave non-metal materials like leather, plush, fabrics, foam, acrylic, plastic, wood, plywood, paper, etc.
- Twice The Speed of a Single Head Laser Cutting Machine
- Smart Control Software Meets Multi-Industry Needs
- High Cutting Precision And Production
- Super Low Machine Investment
Model: K1610-F2
- 💰 $5,000 – $5,400
- 🚚 7–15 days lead time
- 🛡 12-month warranty
Zero Waste of Materials
Hot Sealed Cutting Edge
Any Type of Non Metal Materials
Stable and 24 Hours Running
See the K1610-F2 Double Head Laser Cutter With Honeycomb Table in Action — Production Floor Video
Watch the K1610-F2 Double Head Laser Cutter With Honeycomb Table run a real cutting job on our factory floor — feed alignment, beam path, and continuous output captured at production speed. The clip shows what to expect on day one before you commit to a machine of this class.
See the K1610-F2 Double Head Laser Cutter With Honeycomb Table in Action — Production Floor Video
Compared with the single-head laser cutting machine, KASU’s double-head laser cutting machine with honeycomb table K1610-F2 doubles the cutting production and can offer you a less than 3 months ROI cutting workshop solution! High-precision cutting also ensures your high product quality.
K1610-F2 Double Head Laser Cutter With Honeycomb Table — Full Spec Sheet, Accessories & Manufacturing
Every dimension you need to evaluate the K1610-F2 Double Head Laser Cutter With Honeycomb Table in one place — complete technical data sheet, included accessories, available optional upgrades, and our factory manufacturing process. Key strengths at a glance: Zero Waste of Materials, Hot Sealed Cutting Edge, and Any Type of Non Metal Materials. Switch the tabs below to drill into each.
- Data Sheet
- Includes & Options
- Video Testimonials
| Working Area | 1600MM*1000MM | Software | KASU |
| Laser Type | Glass CO2 Laser Tube | Working Speed | <1000 MM/S |
| Laser Power | 80/100/130/150W | Power Supply Requirements | AC220V±5% 50Hz/60Hz 1Phase |
| Heads of Laser | Double Heads | Format Supported | AI\BMP\PLT\DXF\DST |
| Dimensions with Wood Package | 2.3*1.9*1.32M | Positioning Accuracy | ±0.1MM |
| Gross Weight | 600KG | Operating Temperature | minus 10℃~45℃ |
| Motion System | Stepping Motor | Operating Humidity | 5-95% |
| Cooling System | 5200 Industrial Water Chiller | Total Power | <1.5KW (Excluding exhauster) |
What's Included with the K1610-F2 Double Head Laser Cutter With Honeycomb Table
- 2× Glass CO2 laser tubes — 80W / 100W / 130W (configurable)
- 2× independent cutting heads on shared gantry
- HIWIN-spec linear rails for 1600 × 1000 mm bed
- Honeycomb aluminum cutting table (standard)
- 2× American II–VI 25mm focusing lenses
- 2× three-mirror reflective sets
- S&A CW-5200 industrial chiller (2-tube capacity)
- Hailey diaphragm air pump (2-line)
- 1.5kW centrifugal smoke exhaust + ducting kit
- Industrial DC HV power supply
- Triangle-truss welded steel frame
- E-stop + tower light
- Multi-language CE laser warning labels
- Factory tool kit
Compatible Upgrades for the K1610-F2 Double Head Laser Cutter With Honeycomb Table
- Rotary axis (φ80 / φ100 / φ160)
- CCD vision camera
- Blade knife table swap
- Auto-focus Z-axis (each head)
- Extended-warranty pack
Standard Accessories Catalog Full reference: components included with every KASU machine, lifetime & replacement info. View catalog → All Optional Upgrades Rotary axes, CCD vision, auto-focus heads, multi-head configs, hot iron, 5-axis — compatibility & capex. Explore upgrades → KASU Shanghai HQ & Suzhou Factory 100+ models, 9 series, ISO 9001 / CE / FDA, 5,000+ customers in 80+ countries. See our factory →
Inside the K1610-F2 Double Head Laser Cutter With Honeycomb Table — Engineering Highlights & Capabilities
The blocks below take you inside the K1610-F2 Double Head Laser Cutter With Honeycomb Table — each illustrates one specific engineering choice, component, or workflow capability that defines how this machine performs in production. Topic-by-topic below: Smart Laser Control Card and Software, Reinforced Hardware Module, and Sealed Glass Co2 Laser Tube.
Smart Laser Control Card and Software
While using KASU K1610-F2 laser cutter, only CAD design files are necessary, and you can design at your wish. The smart laser control software can make the whole cutting and engraving process highly automatic.
Reinforced Hardware Module
The laser cutter lasts longer since there is no mechanical friction that could lead to wear and tear. KASU laser’s reinforced hardware module make our cutter achieve an impressive level of precision. This level of accuracy is as high as +/- 0.1mm, which is one of the best you’ll get from laser cutting.
Sealed Glass Co2 Laser Tube
A sealed glass Co2 laser tube is one of the consumables for a Co2 laser cutting machine. But the Made-In-China Co2 glass tube’s ROI is super high. One 100W laser tube can last for over 2 years based on 8 working hours per day. And you only need to pay about 300 US Dollars to replace one.
One Stop Laser Solution For Your Product
Request An Instant Quote For Your Industry
How KASU Support Your Business
Get in touch today! Widely appreciated worldwide with 5000+ global cases.
OEM/ODM services, 7/24 after-sale service available, short response time. Our laser machines are well-known for their tough construction and long service life. We are competent and specialized in this industry for more than 12 years. KASU Laser creates 100% of the core components for our laser engravers, cutters, and marking machines.
Frequently Asked Questions About the K1610-F2 Double Head Laser Cutter
When does a two-head K1610-F2 make more sense than a four-head K1610-F4?
The K1610-F2 is the right pick when (a) your batch sizes are 50-500 identical pieces (4 heads is overkill at lower volumes since you waste idle heads), (b) your shop runs a mix of repetitive and one-off jobs (two heads still parallelise the repetitive work), or (c) capex is constrained — the F2 lands at roughly 75% of the F4 price while delivering 2× the throughput of a single-head. For sign shops, leather workshops, and packaging prototypers doing daily batches in the 100-300 piece range, the F2 hits the sweet spot.
Can the two heads on the K1610-F2 cut different patterns simultaneously?
By default, both heads run the same pattern in parallel (the productivity-multiplier mode). KASU’s control software also supports independent-pattern mode: head A cuts pattern X on the left half of the bed while head B cuts pattern Y on the right — useful when you have two unrelated small jobs queued. Independent mode adds 10-15% to setup time but lets you knock out two small jobs in one machine cycle.
Which industries adopt double-head laser cutters most in 2025?
Leading 2025 buyer segments: leather-goods workshops in Italy, Portugal, and Turkey (handbag-panel batches); embroidered-patch makers in Vietnam, Mexico, and the US (patch trim production); shoe-upper prototyping shops across Asia (mid-volume sampling); and PU-leather automotive interior shops in Germany and Romania. Common need: mid-volume production where doubling throughput pays back the second head within a single quarter.
What's the cut-quality difference between honeycomb and conveyor-fed cutters on PU leather?
| Factor | K1610-F2 (honeycomb) | Roll-to-roll (e.g., K1814-SY) |
|---|---|---|
| Sheet flatness | Operator places flat | Roll tension may curl edges |
| Cut precision | ±0.1 mm consistent | ±0.2-0.3 mm (curl-dependent) |
| Best for | Pre-cut leather hides, panels | Continuous roll PU leather |
| Material waste | Higher (hide perimeter) | Lower (roll edge-to-edge) |
What add-ons turn the K1610-F2 into a fabric-specialised cutter?
Standard K1610-F2 ships with the honeycomb table for rigid stock. To convert it for fabric / PU leather workflows, KASU offers (1) a removable bristle table that prevents fabric snagging, (2) a conveyor feeder add-on for short-roll feed, (3) lower-wattage 60 W tubes specifically tuned for thin-fabric cutting without scorching, and (4) a vacuum table for holding stretch fabrics flat. The honeycomb is removable so the machine flexes between rigid and soft work in 5 minutes.
Request A Laser Solution