What should be paid attention to when using laser cutting machine? How to use it is the most correct?

Precautions for the use of laser cutting machine The machine tool must be strictly grounded. It is strictly forbidden to switch on during thunder and lightning. It is strictly forbidden to block the cooling water pipe. It is strictly forbidden to run the laser at full power for a long time.


Laser machine detailed precautions

1: It is strictly forbidden to turn on the machine without grounding. The grounding of all parts of the machine must be completely reliable to prevent static electricity from hurting people.

2: After each startup, you must check whether the submersible pump is out of water. If there is no water, it is strictly prohibited to start work.

3: Ensure that the circulating water has a moderate water temperature, and the water quality is dry and free of debris (purified water is recommended). Regularly replace the circulating water (7 days).

4: Use special camera lens paper or a medical cotton swab moistened with a mixture of alcohol and ether to wipe the reflector and focusing lens. (The mixing ratio of ether and alcohol is 1:1)

5: The fan must be turned on when engraving, so as not to pollute the lens and focusing lens.

6: It is strictly forbidden to place flammable and explosive materials near the laser machine equipment. When the machine is working, the top cover of the machine must be covered to prevent fire or injury due to laser deviation.

7: During the working process of the machine, the operator is forbidden to leave without authorization to avoid unnecessary losses.

8: Non-professionals are strictly prohibited to disassemble the machine without authorization to avoid accidents.

9: It is strictly forbidden to place any irrelevant reflective objects in the equipment to prevent the laser from being directly reflected on the human body or flammable objects, causing danger.

10: It is forbidden to turn on when the voltage is unstable, otherwise, a voltage stabilizer must be used.